Australian Screen Printing Supplies - Inks, Screens, Mesh, Squeegees, Vinyls and Films, Emulsion, Screen Stretching Service & Screen Print Supplies.    
 
 
     
 

TWO CAN EPOXY - PRODUCT DESCRIPTION

Finish

Drying

Thinner Wash Up

Mesh

Stencil

Coverage

Application

Colour Range

Gloss

Touch dry approx 2 hours.
Maximum final cure 7 days.

Thinner ER180
Retarder ER182
Wash Up ER180

Mono Filament fabric 62t to 140t.

Any non solvent based emulsion

Approx 35 sq mt per kg.

Refer to A.S.I ink selector chart

13 Standard
8 Basic
Pantone plus Black and White.
Special colours as required.

Product Description
The Two Can Epoxy ink series exhibit excellent solvent and chemical resistance and offer a high degree of adhesion to a variety of difficult to print surfaces.

As the name indicates the Two Can Epoxy ink series is a two can system that dries by polymerisation. A catalyst ER176 added prior to use, initiates the polymerisation process. The system will NOT dry or cure without the addition of catalyst.

After the addition of catalyst the ink system will air dry to a tack free state in approximately 2 hours, but 7 days are required for the film to fully cure to maximum adhesion and chemical resistance. If force drying or baking, the time to complete cure is as follows:

120Deg. C (250Deg.F) for 10 minutes. 150 Deg. C (300 Deg. F) for 7 minutes. 180Deg. C (350 Deg.F) for 4 minutes.

Substrate and End-Use
The Two Can Epoxy ink system has displayed excellent adhesion to a wide range of industrial substrates including most metals, glass, treated Polyethylene, treated Polypropylene, Powder coated surfaces to name but a few. For a comprehensive list of suitable substrates refer to the A.S.I. ink selector chart. Two Can Epoxy inks are NOT suitable for vinyl substrates.

TWO CAN EPOXY COLOUR RANGE

Note that colours shown on screen can vary to true ink colours.

    Primrose Yellow - 30     Light Blue - 52     Basic Rhodamine - 03
    Lemon Yellow - 32     Royal Blue - 57     Basic Purple - 04
    Golden Yellow - 34     Permanent Blue - 59     Basic Reflex Blue - 05
    Orange - 24     Basic Yellow - 00    Basic Process Blue - 06
    Fire Red - 22     Basic Warm Red - 01     Basic Green - 07
    Emerald Green - 42     Basic Rubine - 02     White - 112
    Black - 111        
           

ADDITIVES AVAILABLE

Silver Powder - SU132
Epoxy Catalyst - ER176
Mixing Clear - 170
Sharp Print Compound - SU178
Matt Paste - SU5935 Gold Powder - SU5656
Pro-Pack Clear (Part A) - SU3780 Pro-Pack Clear (Part B) - SU3781
Thinner and Retarder    

 

 
 
Created by RustyGate