Australian Screen Printing Supplies - Inks, Screens, Mesh, Squeegees, Vinyls and Films, Emulsion, Screen Stretching Service & Screen Print Supplies.    




Thinner Wash Up





Colour Range


Not suitable for jet drying. Touch dry approx 1 to 2 hours, full cure 7 days

Thinner NP180
Retarder NP182
Wash Up SU5112

Mono Filament fabric 43t to 62t.

Any non solvent based emulsion

Approx 30 sq mt per kg.

Refer to A.S.I ink selector chart

13 Standard plus Black and White. Not available in Basic Pantone.

Product Description
Nylo-Print inks are a flexible and elastic ink suitable for printing on most synthetic and natural fabrics. The system has displayed a high degree of resistance to laundering and dry-cleaning.

The Nylo-Print series is a two pack system that dries by polymerisation. Nylo-Print catalyst NP176* is mixed in a ratio of 3 parts catalyst to 7 parts Nylo-Print ink prior to printing, this addition initiates the polymerisation (curing) process. The system will NOT fully cure without the addition of catalyst.

Prints will air dry in approximately 30 minutes will full resistance properties developed after 7 days. As an alternative, and if printed substrate will withstand it the prints may be forced cured 93 Deg. C (250.F) for approximately 7 to 10 minutes.

*Catalyst NP176 is moisture sensitive and should be stored in a dry place.

Substrate and End-Use
Acceptable results have been achieved with this ink on waterproof nylon, nylon/polyester blends and sailcloth, however due to the wide batch variation in this range of materials all substrates must be print checked on a batch by batch basis.


Note that colours shown on screen can vary to true ink colours.

    Primrose Yellow - 30     Light Blue - 52     Fire Red - 22
    Lemon Yellow - 32     Royal Blue - 57     Emerald Green - 42
    Golden Yellow - 34     White - 112    
    Orange - 24     Black - 111    


Silver Powder - SU132
Epoxy Catalyst - NP176
Mixing Clear - 170
Sharp Print Compound - SU178
Matt Paste - SU5935 Gold Powder - SU5656
Pro-Pack Clear (Part A) - SU3780 Pro-Pack Clear (Part B) - SU3781
Thinners & Retarder    



Created by RustyGate