Australian Screen Printing Supplies - Inks, Screens, Mesh, Squeegees, Vinyls and Films, Emulsion, Screen Stretching Service & Screen Print Supplies.    







White and light coloured fabrics.

Wet-on-wet printing

Direct prints and transfers

Controls ink build-up

Excellent release from screen

Very soft hand

The use of additives or reducers is not generally recommended with this ink.

Mesh counts from 86T-305T) may be used. Mesh counts over 180T will increase the ink mileage and produce very soft hand prints.

Use any direct emulsion or capillary film.

Product Description
Autoline plastisol ink is a state of the art ink designed to produce high quality prints on high speed automatic presses. Its quick release from the screen provides smooth, strong colours even when using light squeegee pressure. The ink penetrates well and does not build up on the back of succeeding screens. Because of Autoline's soft hand and easy printing qualities it's also an excellent choice for printing on manual presses. Autoline inks are designed to be printed wet-on-wet but work equally well over a first down flash-cured white on dark garments. Autoline inks can also be used in the product of both hot-split and cold-peel transfers.

Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements before using in production.


Note that colours shown on screen can vary to true ink colours.

Blue Magenta
Neon Cerise Red
Traffic Green Violet
Yellow Red B/S


Created by RustyGate